FHPA Finland: New Chairman of the board Recently updated !
There has been a change in the board of the Finnish Hydraulics and Pneumatics Association FHPA. In January 2020, Tapio Read More
Author Archives : CETOP
Hanover Fair 2020 cancelled Recently updated !
The Hannover Messe will be cancelled in 2020 due to the Covid 19 pandemic. The cancellation is regrettable, but it Read More
HPKON WILL HOST THE HYDRAULICS AND PNEUMATICS INDUSTRY IN IZMIR, 18-21 NOVEMBER 2020
During the HPKON congress and exhibition, the Turkish Fluid Power Association AKDER, being member in CETOP, has an education programme Read More
HANNOVER MESSE 2020 is postponed
HANNOVER MESSE 2020 will be postponed to the week of 13 to 17 July 2020. Deutsche Messe AG is thus Read More
THE ECONOMIC SITUATION IN ITALY
The Italian CETOP member ASSOFLUID reports on the economic situation in Italy. In the fourth quarter of 2019 the seasonally Read More
Certification of “PROJEKTHYDRAULIK SVERIGE AB”, Sweden, as CETOP Education Centre
On application of the Swedish Fluid Power Association SFMA, the edcuation centre ProjektHydraulik Sverige AB, Sweden, is re-certified for Industrial Read More
German mechanical engineering in 2019
The German CETOP member association VDMA gives a review about German mechanical engineering in 2019: The end of the year Read More
ASSOFLUID and ASSIOT merge into FEDERTEC
The Italian CETOP member association ASSOFLUID joins in FEDERTEC, the Italian Federation of Mechatronic Technologies and Components for Fluid Power, Read More
12th IFK 2020 - Fluid Power - Future Technology
The 12th International Fluid Technology Colloquium (12th IFK) will take place from 9 to 11 March 2020 in the International Read More
Certification of “BETTINO PADOVANO”, Italy, as CETOP Education Centre
On application of the Italian Fluid Power Association ASSOFLUID, the edcuation centre BETTINO PADOVANO, Senigallia, Italy, is certified for Pneumatics, Read More
Re-certification of the National Fluid Power Centre (NFPC), UK, as CETOP Education Centre
On application of the British Fluid Power Association BFPA, the edcuation centre “National Fluid Power Centre (NFPC)”, is certified CETOP Education Read More
Call for Papers: Forum Industrie 4.0 at Hannover Messe 2020
Deutsche Messe AG, together with its partners Plattform Industrie 4.0, VDMA and ZVEI, will be organizing the Forum Industrie 4.0 Read More
Call for Papers: 11th Colloquium Mobile Hydraulics
The 11th Colloquium Mobile Hydraulics will take place from 10 to 11 September 2020 in Karlsruhe. The registration deadline for Read More
1st HYDRAULIX trade congress with successful kick-off event in Sindelfingen
The hydraulic industry experienced the event highlight of the year on 28 and 29 October 2019. On the day of Read More
SUMMIT ON “STANDARDS” IN ISTANBUL
On the occassion of the World Standards Day, the CETOP member association, AKDER, held a summit meeting on "Standards" in Read More
CETOP President’s Council meets InduMotion in Brussels
InduMotion which is the CETOP member association in Belgium, invited the CETOP President's Council to a meeting on 22/23 October Read More
Dutch Fluid Power Transmission Conference (DFPTC)
On Thursday 10 October 2019, the Dutch Fluid Power Transmission Conference (DFPTC), co-organized by the CETOP member association FEDA, took Read More
ARTEMA Global Indicator for Septembre 2019 : Uncertainty and lack of visibility
The French CETOP member ARTEMA reports on the market outlook based on an inquiry among their member companies.
3rd International Expert Forum for Bearings
Register now! 3rd International Expert Forum for Bearings -Rolling and Plain Bearings! 31 March -1 April 2020 in Hannover Unique, Read More
Jean-Claude Reverdell becomes Artema's new president
On September 26, 2019, Jean-Claude Reverdell - CEO of Sew Usocome was elected President of Artema for 3 years. Pascal Read More
Certification of “OPERE SOCIALI DON BOSCO”, Italy, as CETOP Education Centre
On application of the Italian Fluid Power Association ASSOFLUID, the edcuation centre “OPERE SOCIALI DON BOSCO”, SESTO SAN GIOVANNI (MI), Read More
BFPA celebrates its 60th anniversary in 2019
In the sixty years since its formation, the BFPA has grown from a small group of mutually supportive companies to Read More
International Bearing Conference
BEARING WORLD 2020 - Call for Papers: Submit your abstract and reach international experts Industrial Research and Science in Dialogue Read More
International Fluid Power Conference 2019, 19.-20. September 2019, Maribor, Slovenia
The Slovenian fluid power association FTS will be happy to welcome you on the International Fluid Power Conference 2019, 19.-20. Read More
Certification of ASSOCIAZIONE CNOS-FAP REGIONE LOMBARDIA, Italy, as CETOP Education Centre
On application of the Italian Fluid Power Association ASSOFLUID the edcuation centre ASSOCIAZIONE CNOS-FAP REGIONE LOMBARDIA, Italy, is awarded CETOP Read More
Certification of BOSCH REXROTH B.V. BOXTEL, The Netherlands, as CETOP Education Centre
On application of the Dutch Fluid Power Association FEDA the edcuation centre BOSCH REXROTH B.V., Boxtel, The Netherlands, is awarded Read More
DFPTC - The Dutch Fluid Power Transmission Conference
Theme 2019: Intelligent Hydraulic Power Transmission: The influence of electronic intelligence on hydraulic and mechanical drive engineering For a number Read More
New CETOP President's Council elected on the occasion of the CETOP General Assembly 2019, Ceský Krumlov, Czech Republic
On 13 and 14 June 2019, this year’s CETOP General Assembly took place in Český Krumlov, Czech Republic, hosted by Read More
AKDER TURKISH FLUID POWER ASSOCIATION IS 25 YEARS OLD
Fluid Power in Turkey became a dedicated sector in early 1960s. While this sector achieved gradual growth in size and Read More
VDMA calls for participation in European elections
Just in time for the start of the European election campaign, the VDMA is launching its initiative "Go Vote - Read More
Call for papers: 12th International Fluid Power Conference, March 9 - 11, 2020 in Dresden
The 12th International Fluid Power Conference (IFK) will be held in Dresden on March 9-11, 2020. The IFK is one Read More
50th Anniversary of EUROTRANS – 50 years of global networking
EUROTRANS – the European Committee of Associations of Manufacturers of Gears and Transmission Parts – celebrated its 50th Anniversary on Read More
The NEW CETOP Directory 2019 – Updated on the occasion of the IAMD Hanover
With its CETOP Directory, a buyers' guide, CETOP presents the member companies of the CETOP member associations to a broad Read More
Certification of Fagskolen i Hordaland, Norway, as CETOP Education Centre
Certification of Fagskolen i Hordaland, Norway, as CETOP Education Centre On application of the Norwegian Fluid Power Association HPF NORWAY, Read More
Forum "Motion & Drives"
At the forthcoming Hanover fair (1-5 April 2019) the VDMA Fluid Power Association organises the well-known "Motion & Drives" forum. Read More
World Interoperability Conference - Networking with OPC UA Standardization groups, 1. April 2019 i Hanover
VDMA being co-organiser of the event provided some information. The world language of the machines is under development and with Read More
Power Transmission and Fluid Power - Intelligent, Networked and Communicative into the Future
The power transmission and fluid power industries are expecting growth of around 3 percent in 2019. The industry focusing on Read More
SFMA: New Swedish Fluid Motion Association
SFMA – the Swedish Fluid Motion Association is the new association that was established in 2019 through the merging of Read More
Turkish Industry will progress to the Giants’ League with “WIN EURASIA” 2019
Gathering the world's 6 largest trade fairs under a single roof with the concept of Industry 4.0, once again WIN Read More
AKDER MEMBERS MEET BY THE BOSPHORUS
Members of AKDER TURKISH FLUID POWER ASSOCIATION dined together on the Bosphorus strand. The dinner by the Bosphorus was attended Read More
Indumation.be 2019, fair for Factory, Process and Automation, 6.-8. February 2019, Kortrijk Xpo
The Belgian fluid power association InduMotion will be happy to welcome you on Indumation.be 2019. From February 6 till 8, Read More
Re-Certification of I.I.S. “G. VALLAURI”, Italy, as CETOP Education Centre
On application of the Italian Fluid Power Association ASSOFLUID, the edcuation centre I.I.S. "G. VALLAURI", Fossano (CN), Italy, is awarded Read More
German mechanical engineering industry remains robust in a difficult environment
Mechanical engineering companies in Germany successfully defied the trade policy storms in 2018 and even increased their workforces despite many Read More
FEDA MEMBER EVENT AND GENERAL MEETING
The Netherlands CETOP member association FEDA held their member event and general meeting on Thursday, 13 December 2018.
AKDER AWARDED BY TURKISH STANDARDS INSTITUTION (TSE)
The Turkish CETOP member association AKDER received national award. AKDER has been collaborating with the Turkish Standards Institution (TSE) on Read More
BSI secures membership of CEN and CENELEC
BFPA, the British Fluid Power Association, cooperates closely with BSI when it comes to standards for fluid power. BSI, the Read More
National Oilwell Varco launches new CETOP Level 1 course in hydraulics
On application of the BFPA British Fluid Power Association, NOV National Oilwell Varco Training Centre was awarded CETOP approved Education Read More
Certification of IPSIA “A. Pacinotti”, Italy, as CETOP Education Centre
On application of the Italian Fluid Power Association ASSOFLUID, the edcuation centre IPSIA "A. Pacinotti", Pontedera (PI), Italy, is awarded Read More
InduMotion, Belgium: New board
The Belgium association InduMotion, being member in CETOP for many years, has about 80 members and thus, covers the majority Read More
International Conference "Hydraulic and Pneumatic Drives and Controls 2018"
The International Scientific-Technical Conference: takes place at Kliczków Castle, Poland, 7-9 November 2018. Co-organizer of this event is the polish Read More