AKDER TURKISH FLUID POWER ASSOCIATION IS 25 YEARS OLD
by CETOP on May.23, 2019
Fluid Power in Turkey became a dedicated sector in early 1960s. While this sector achieved gradual growth in size and familiarity during the past 20-25 years, it was only in 1990s when the establishmnet of an association started to be discussed. Subsequently, AKDER Fluid Power Association was founded on 3 February 1994.
AKDER has achieved steady growth, as it enabled its members to get together and discuss mutual challenges. As one of AKDER's founders said: "Before AKDER was founded, we would shy away from dropping by the offices of our collleagues in the sector. We did not really gather to talk about work. This was especially true because of the perceived competition among each other. But now, we meet under the name of AKDER, share statistics and are at ease, knowing we are on the same boat together." (continue reading...)
Comments Off on AKDER TURKISH FLUID POWER ASSOCIATION IS 25 YEARS OLD
VDMA calls for participation in European elections
by CETOP on May.02, 2019
Just in time for the start of the European election campaign, the VDMA is launching its initiative "Go Vote - Engineering industry votes for Europe". With this initiative, the Association calls on its members and their staff to take part in the European elections on 26 May 2019. (continue reading...)
Comments Off on VDMA calls for participation in European elections
Call for papers: 12th International Fluid Power Conference, March 9 - 11, 2020 in Dresden
by CETOP on Apr.16, 2019
The 12th International Fluid Power Conference (IFK) will be held in Dresden on March 9-11, 2020. The IFK is one of the world's most significant scientific conferences on fluid power control technology and systems. It offers a common platform for the presentation and discussion of trends and innovations to manufacturers, users and scientists. The theme of the 12th IFK will be "Fluid Power - Future Technology!"
The abstract submission is opened until 10th of June 2019. (continue reading...)
Comments Off on Call for papers: 12th International Fluid Power Conference, March 9 - 11, 2020 in Dresden
50th Anniversary of EUROTRANS – 50 years of global networking
by CETOP on Apr.10, 2019
EUROTRANS – the European Committee of Associations of Manufacturers of Gears and Transmission Parts – celebrated its 50th Anniversary on the occasion of the 5th International Drive Technology Meeting in Hanover, Germany, on Saturday, 30th March 2019. (continue reading...)
Comments Off on 50th Anniversary of EUROTRANS – 50 years of global networking
The NEW CETOP Directory 2019 – Updated on the occasion of the IAMD Hanover
by CETOP on Apr.01, 2019
With its CETOP Directory, a buyers' guide, CETOP presents the member companies of the CETOP member associations to a broad audience both in Europe and abroad. The Directory contains information on the products of over 1,000 companies, both manufacturers and suppliers, in the European fluid-power industry. (continue reading...)
Comments Off on The NEW CETOP Directory 2019 – Updated on the occasion of the IAMD Hanover
Certification of Fagskolen i Hordaland, Norway, as CETOP Education Centre
by CETOP on Mar.20, 2019
Certification of Fagskolen i Hordaland, Norway, as CETOP Education Centre
On application of the Norwegian Fluid Power Association HPF NORWAY, the edcuation centre Fagskolen i Hordaland, Norway, is awarded CETOP Education Centre for Hydraulics, level 1 and 2.
A description of the levels is available in the chapter Education / Level of Competence.
Comments Off on Certification of Fagskolen i Hordaland, Norway, as CETOP Education Centre
Forum "Motion & Drives"
by CETOP on Mar.15, 2019
At the forthcoming Hanover fair (1-5 April 2019) the VDMA Fluid Power Association organises the well-known "Motion & Drives" forum. In this established forum, concepts, innovative solutions and application examples will be presented in Hall 23/B20 as part of the hannover Messe. (continue reading...)
Comments Off on Forum "Motion & Drives"
World Interoperability Conference - Networking with OPC UA Standardization groups, 1. April 2019 i Hanover
by CETOP on Mar.08, 2019
VDMA being co-organiser of the event provided some information.
The world language of the machines is under development and with the help of OPC UA it will be implemented! Would you like to get to know the industries and members of the standardization groups personally? (continue reading...)
Comments Off on World Interoperability Conference - Networking with OPC UA Standardization groups, 1. April 2019 i Hanover
Power Transmission and Fluid Power - Intelligent, Networked and Communicative into the Future
by CETOP on Mar.05, 2019
The power transmission and fluid power industries are expecting growth of around 3 percent in 2019. The industry focusing on industry 4.0 solutions at the Hannover Messe. The World trade share on the rise.
Comments Off on Power Transmission and Fluid Power - Intelligent, Networked and Communicative into the Future
SFMA: New Swedish Fluid Motion Association
by CETOP on Feb.20, 2019
SFMA – the Swedish Fluid Motion Association is the new association that was established in 2019 through the merging of HPF (Swedish Association for Hydraulics and Pneumatics) – established 1962, and IFS (Fluid System Engineering Association) – established 1972, and currently comprises some 60 members. With joint forces the aim of the new association is to become stronger in promoting the industry and quality, safety and reliability when using hydraulics and pneumatics. SFMA actively supports standardisation in Sweden and works for increased information and education of users and suppliers in this field. SFMA is also the certifying body for hydraulics engineers in Sweden – a quality and professional benchmark for the automation industry.
Comments Off on SFMA: New Swedish Fluid Motion Association
Turkish Industry will progress to the Giants’ League with “WIN EURASIA” 2019
by CETOP on Feb.12, 2019
Gathering the world's 6 largest trade fairs under a single roof with the concept of Industry 4.0, once again WIN EURAS?A is getting ready to bring together all the world giants in Istanbul between March 14 - 17, 2019 under the slogan "Become a Part of the Future". The Turkish fluid power association AKDER is one of the official supporters of this event.
Comments Off on Turkish Industry will progress to the Giants’ League with “WIN EURASIA” 2019
AKDER MEMBERS MEET BY THE BOSPHORUS
by CETOP on Jan.15, 2019
Members of AKDER TURKISH FLUID POWER ASSOCIATION dined together on the Bosphorus strand. The dinner by the Bosphorus was attended by over 50 members.
Mr Semih KUMBASAR, President of AKDER, shared updates on the association’s recent activities; notably on training programmes, the General Assembly of CETOP in Copenhagen, latest statistics and macroeconomic developments in Turkey.
Comments Off on AKDER MEMBERS MEET BY THE BOSPHORUS
Indumation.be 2019, fair for Factory, Process and Automation, 6.-8. February 2019, Kortrijk Xpo
by CETOP on Jan.15, 2019
The Belgian fluid power association InduMotion will be happy to welcome you on Indumation.be 2019. From February 6 till 8, InduMotion, Expo Advice and Agoria, are hosting the 5th edition of INDUMATION.be, a Belgian fair for Factory, Process and Automation. The theme will be 'Smart and integrated solutions for Industry'. Indumation.be 2019 is growing to a next level. The existing visitor routes and the range of components, devices, technology and solutions for industrial automation, innovation and optimization for all branches of the Industry (discrete & process) and infrastructures remain most important.
Comments Off on Indumation.be 2019, fair for Factory, Process and Automation, 6.-8. February 2019, Kortrijk Xpo
Re-Certification of I.I.S. “G. VALLAURI”, Italy, as CETOP Education Centre
by CETOP on Jan.11, 2019
On application of the Italian Fluid Power Association ASSOFLUID, the edcuation centre I.I.S. "G. VALLAURI", Fossano (CN), Italy, is awarded CETOP Education Centre. I.I.S. "G. VALLAURI" has recently been re-certified for Hydraulics, level 1 and Pneumatics, level 3. A description of the levels is available in the chapter Education / Level of Competence.
Comments Off on Re-Certification of I.I.S. “G. VALLAURI”, Italy, as CETOP Education Centre
German mechanical engineering industry remains robust in a difficult environment
by CETOP on Dec.19, 2018
Mechanical engineering companies in Germany successfully defied the trade policy storms in 2018 and even increased their workforces despite many uncertainties. "Our forecast for a production growth of 5 percent to a record 228 billion euros in 2018 is ambitious but feasible," said VDMA President Carl Martin Welcker at the association's annual press conference. (continue reading...)
Comments Off on German mechanical engineering industry remains robust in a difficult environment
FEDA MEMBER EVENT AND GENERAL MEETING
by CETOP on Dec.14, 2018
The Netherlands CETOP member association FEDA held their member event and general meeting on Thursday, 13 December 2018.
Comments Off on FEDA MEMBER EVENT AND GENERAL MEETING
AKDER AWARDED BY TURKISH STANDARDS INSTITUTION (TSE)
by CETOP on Dec.12, 2018
The Turkish CETOP member association AKDER received national award.
AKDER has been collaborating with the Turkish Standards Institution (TSE) on Fluid Power Standards (ISO TC 131) since 2004. More recently, AKDER has been actively participating to the country level discussion at the Mirror Committee. (continue reading...)
Comments Off on AKDER AWARDED BY TURKISH STANDARDS INSTITUTION (TSE)
BSI secures membership of CEN and CENELEC
by CETOP on Dec.04, 2018
BFPA, the British Fluid Power Association, cooperates closely with BSI when it comes to standards for fluid power. BSI, the British Standards Institution, is the national standards body of the UK.
On 23 November, the General Assemblies of the European Standards Organizations CEN and CENELEC approved a plan that secures BSI's full membership post-Brexit. BSI welcomes the outcome as a pragmatic solution that provides stability for the European standards system while meeting the needs of the stakeholders.
(continue reading...)
Comments Off on BSI secures membership of CEN and CENELEC
National Oilwell Varco launches new CETOP Level 1 course in hydraulics
by CETOP on Nov.26, 2018
On application of the BFPA British Fluid Power Association, NOV National Oilwell Varco Training Centre was awarded CETOP approved Education centre. Following their recent accreditation to deliver CETOP Level 1 courses, BFPA Training member National Oilwell Varco Training Centre, based in Scotland are pleased to announce they have held their first CETOP Level 1 course. (continue reading...)
Comments Off on National Oilwell Varco launches new CETOP Level 1 course in hydraulics
Certification of IPSIA “A. Pacinotti”, Italy, as CETOP Education Centre
by CETOP on Nov.16, 2018
On application of the Italian Fluid Power Association ASSOFLUID, the edcuation centre IPSIA "A. Pacinotti", Pontedera (PI), Italy, is awarded CETOP Education Centre. IPSIA "A. Pacinotti", has recently been certified for Pneumatics, level 2.
A description of the levels is available in the chapter Education / Level of Competence.
Comments Off on Certification of IPSIA “A. Pacinotti”, Italy, as CETOP Education Centre
InduMotion, Belgium: New board
by CETOP on Nov.06, 2018
The Belgium association InduMotion, being member in CETOP for many years, has about 80 members and thus, covers the majority of the Belgian industrial automation market. The members are active in Hydraulics, Pneumatics, Electromechanical, Transmissions and Electronic in power as well as in motion.
Comments Off on InduMotion, Belgium: New board
International Conference "Hydraulic and Pneumatic Drives and Controls 2018"
by CETOP on Oct.05, 2018
The International Scientific-Technical Conference: Hydraulic and Pneumatic Drives and Controls 2018, Condition, Need, Expectations and Possibilities. Work, Mining, Construction and Technology Machines takes place at Kliczków Castle, Poland, 7-9 November 2018. Co-organizer of this event is the polish fluid power association Corporation Poland. This onference is the largest and most important national forum for the exchange of concepts, experiences and opportunities in the field of fluid technology. It has an international character and has been covered, among others the patronage of the European Committee for Hydraulics and Pneumatics (CETOP).
(continue reading...)
Comments Off on International Conference "Hydraulic and Pneumatic Drives and Controls 2018"
CETOP General Assembly 2018, Copenhagen
by CETOP on Sep.21, 2018
On 27 and 28 September 2018, this year's CETOP General Assembly takes place in Copenhagen, Denmark, hosted by the Danish CETOP member BITVA.
There will be information on the CETOP Education matters and activities. The Commissions will inform about technics, marketing and economic issues.
The CETOP General Assembly is open exclusively to the CETOP member associations, their member companies and representatives.
Comments Off on CETOP General Assembly 2018, Copenhagen
International Sealing Conference
by CETOP on Sep.11, 2018
The Fluid Power Association of VDMA (the Mechanical Engineering Industry Association), with its Fluid Power Sealing Group is organizing the 20th ISC International Sealing Conference on October 10 and 11, 2018, at the University of Stuttgart. The Conference will be held under the scientific auspices of Dr.-Ing. Frank Bauer, the new director of sealing technology at the Institute of Machine Components of the University of Stuttgart. (continue reading...)
Comments Off on International Sealing Conference
ASSOFLUID, 50th anniversary
by CETOP on Jul.11, 2018
CETOP congratulates its Italian member association ASSOFLUID on its 50th anniversary. ASSOFLUID currently has 180 member companies, representing 70% of the Italian market and approximately 14,000 people. ASSOFLUID became member in CETOP in 1969. On 11th of June 2018, ASSOFLUID celebrated its 50 anniversary. On this occasion, an interesting brochure on the ASSOFLUID history and achievements was produced. Find some interesting information on the association and (continue reading...)
Comments Off on ASSOFLUID, 50th anniversary
Certification of National Oilwell Varco Training Centre, UK, as CETOP Education Centre
by CETOP on Jul.05, 2018
On application of the British Fluid Power Association BFPA, the edcuation centre National Oilwell Varco Training Centre NOV, Montrose, Scotland, is awarded CETOP Education Centre. NOV has recently been certified for Hydraulics, level 1. NOV's focus is on Industrial Hydraulics. A description of the levels is available in the chapter Education / Level of Competence
NOV now is one of more than 30 certified CETOP Education Centres all over Europe. Find all these centres on the CETOP website.
Comments Off on Certification of National Oilwell Varco Training Centre, UK, as CETOP Education Centre
Brexit: EURIS European Network Meeting on 11 July 2018 in London
by CETOP on Jun.20, 2018
The UK Orgalime members have formed a group of associations named EURIS to represent the UK industries to Government on the Brexit process, the consequences and the future UK-EU trading relationship. The first EURIS European Network meeting on 11 July 2018 in London will be an opportunity to begin and develop real solutions to the challenges presented by Brexit for the industrial product supply sector. The British Fluid Power Association BFPA is directly involved in EURIS.
Comments Off on Brexit: EURIS European Network Meeting on 11 July 2018 in London
Managing Fluid and Lubricant Contamination
by CETOP on Jun.12, 2018
The British Fluid Power Association BFPA is organising an international conference on "Managing Fluid and Lubricant Contamination" to be held at the Centre for Power Transmission and Motion Control, Bath, England on 10 and 11 September, 2018. The conference is addressed to OEMs or end users who need to maintain clean systems, to people being responsible for fluid and lubricant maintenance, filtration and condition monitoring in a wide range of applications as well as to lubricant or hydraulic fluid professionals.
Read more ...
Comments Off on Managing Fluid and Lubricant Contamination
FEDA, developing for fourty years
by CETOP on Jun.11, 2018
This year on May 31st the Dutch CETOP member association FEDA celebrated its 40th anniversary. Being a merger of different associations, FEDA has more than 170 members, among them also fluid power companies. The FEDA associated members offer employment for about 30.000 people, who together generate a turnover of 4 billion Euro which makes FEDA one of the strongest technical branch organizations in the Netherlands.
Comments Off on FEDA, developing for fourty years
Hannover Messe 2018, April 23. - 27.: Integrated Industry - Connect & Collaborate
by CETOP on Apr.24, 2018
The lead topic of Hannover Messe 2018 - "Integrated Industry - Connect & Collaborate" - shows that connection in industry is creating totally new forms of working, collaborating and doing business. The result being greater competitiveness, better jobs and new business models. VDMA and its sector network is represented in various halls at Hannover 2018, with a wide range of events on offer.
Read more on hannovermesse.vdma.org/home
Comments Off on Hannover Messe 2018, April 23. - 27.: Integrated Industry - Connect & Collaborate
AKDER General Assembly
by CETOP on Mar.28, 2018
The Turkish fluid power association AKDER, being member in CETOP for many years, organised its General Assembly.
(continue reading...)
Comments Off on AKDER General Assembly
Study on Predictive Maintenance carried out by VDMA together with Roland Berger
by CETOP on Mar.01, 2018
VDMA, Roland Berger, DMAG
The manufacturing industry has clearly understood that predictive maintenance (PM) is a key issue, a precondition for efficient, sustainable service delivery in the future. In 2017, the VDMA Fluid Power Association together with Roland Berger carried out a study on Predictive Maintenance. The study is available for download. (continue reading...)
Comments Off on Study on Predictive Maintenance carried out by VDMA together with Roland Berger
International Sealing Conference Stuttgart 2018: Call for papers
by CETOP on Jan.31, 2018
The motto of the 20th ISC International Sealing Conference is "Sealing Technology - Beyond Limitations". The conference will take place on 10/11 October 2018 in Stuttgart, Germany. It is organized by the Fluid Power Association within VDMA in cooperation with the IMA Institute of Machine Components, belonging to the University of Stuttgart. Read more ...
Comments Off on International Sealing Conference Stuttgart 2018: Call for papers
Re-certification of C.S.M. SRL, Italy, as CETOP Education Centre
by CETOP on Jan.15, 2018
On application of the Italian Fluid Power Association ASSOFLUID, the edcuation centre C.S.M. SRL, Santarcangelo di Romagna, Italy, is again awarded CETOP Education Centre. C.S.M. has recently been re-certified for Pneumatics, level 3.
A description of the levels is available in the chapter Education / Level of Competence.
Comments Off on Re-certification of C.S.M. SRL, Italy, as CETOP Education Centre
VDMA Annual Press Conference: Facts and Data on the German mechanical engineering industry
by CETOP on Dec.13, 2017
Sales in German mechanical engineering industry surpass EUR 220 billion mark for the first time in 2017. This was reported at the VDMA annual press conference in Frankfurt, Germany. An increase in sales to more than EUR 230 billion is expected for 2018. (continue reading...)
Comments Off on VDMA Annual Press Conference: Facts and Data on the German mechanical engineering industry
VDMA Fluid Power General Assembly: New board / Industry expects nine percent growth in 2017
by CETOP on Dec.05, 2017
Christian H. Kienzle, CEO of the ARGO-HYTOS Group
The General Assembly of the VDMA Fluid Power Association, held on 14 and 15 September 2017 in Augsburg, included the confirmation of Christian H. Kienzle, Managing Director of ARGO-HYTOS GmbH, for a further 4-year term in office as the Chair.
(continue reading...)
Comments Off on VDMA Fluid Power General Assembly: New board / Industry expects nine percent growth in 2017
Happy 10th birthday to Artema!
by CETOP on Nov.27, 2017
Artema : the French Mechatronic Industries Association has celebrated his 10th year of its creation on october the first ; this year.
Comments Off on Happy 10th birthday to Artema!
HPKON will host the Hydraulic and Pneumatic Industry in Izmir, 22-25 November 2017
by CETOP on Nov.21, 2017
During the HPKON congress and exhibition, the Turkish Fluid Power Association AKDER, being member in CETOP, has an education programme for Hydraulics and Pneumatics. (continue reading...)
Comments Off on HPKON will host the Hydraulic and Pneumatic Industry in Izmir, 22-25 November 2017
40 Year Finland Association
by CETOP on Nov.13, 2017
FHPA, who represents Finland in CETOP, aims to maintain and support a successful and developing high-technology field which acts as an innovative trendsetter in Finnish industry and is a respected employer. This important association celebrates its 40th anniversary this year. (continue reading...)
Comments Off on 40 Year Finland Association
HPF Sweden: President
by CETOP on Aug.09, 2017
Tobias Lidén took from mid 2016 over the position as President for HPF (Hydraulic and Pneumatic association) in Sweden.
(continue reading...)
Comments Off on HPF Sweden: President
Re-certification of Istituto Salesiano San Zeno, Italy, as CETOP Education Centre
by CETOP on Aug.08, 2017
On application of the Italian Fluid Power Association ASSOFLUID, the Istituto Salesiano San Zeno, Verona, Italy, is again awarded CETOP Education Centre. The Istituto has recently been re-certified for Pneumatics, level 3.
A desription of the levels is available in the chapter Education / Level of Competence.
Comments Off on Re-certification of Istituto Salesiano San Zeno, Italy, as CETOP Education Centre
Domenico Di Monte confirmed as President
by CETOP on Jun.29, 2017
The Italian CETOP member ASSOFLUID informs that Mr. Domenico Di Monte (Camozzi Spa) has been confirmed President of ASSOFLUID – Italian Association of Manufacturing and Trading Companies in Fluid Power Equipment and Components. Mr. Di Monte will remain in office for a four-years terms. (continue reading...)
Comments Off on Domenico Di Monte confirmed as President
New CETOP member association – BITVA / Denmark
by CETOP on Jun.13, 2017
CETOP is proud to announce that with the Danish association BITVA it can welcome a new CETOP member association. The application was officially approved at the CETOP General Assembly 2017 in Barcelona, Spain, on 2 June 2017. (continue reading...)
Comments Off on New CETOP member association – BITVA / Denmark
CETOP General Assembly 2017, Barcelona
by CETOP on Jun.13, 2017
On 1 and 2 June 2017, this year's CETOP General Assembly and the related Commissions' meetings took place in Barcelona, Spain, hosted by the Spanish CETOP member AIFTOP.
The Commissions are concerned with technics, marketing, economic and education issues. The Technics Commission for instance dealt with some EU Directives and regulations having an impact on fluid power: PED Directive, Ecodesign Directive, REACH and CLP, ROHS. (continue reading...)
Comments Off on CETOP General Assembly 2017, Barcelona
Re-certification of NFPC, UK, as CETOP Education Centre
by CETOP on May.29, 2017
On application of the British Fluid Power Association BFPA, the National Fluid Power Centre NFPC in Worksop, UK, is again awarded CETOP Education Centre. NFPC has recently been re-certified for both Mobile Hydraulics and Industrial Hydraulics, levels 1, 2 and 3. NFPC is also certified for Pneumatics, levels 1, 2 and 3..
A desription of the levels is available in the chapter Education / Level of Competence.
Comments Off on Re-certification of NFPC, UK, as CETOP Education Centre
The CETOP Directory 2017 – the European buyers’ guide for fluid power
by CETOP on Apr.25, 2017
The CETOP Directory gives an overview of the entire European fluid power industry. It provides information on more than 1.000 fluid power companies and their products. Suppliers of standard products and special solutions are featured, together with a comprehensive range of services.
Comments Off on The CETOP Directory 2017 – the European buyers’ guide for fluid power
Industry 4.0 is changing Industries, Markets ... and Trade Fairs
by CETOP on Apr.05, 2017
Industrial Automation and MDA merge to form Integrated Automation, Motion & Drives (IAMD)
As of next year, Deutsche Messe, the organizer of HANNOVER MESSE, will merge the event’s annual Industrial Automation (IA) fair with the biennial Motion, Drive & Automation (MDA). The new, combined flagship tradeshow will be called Integrated Automation, Motion & Drives (IAMD) and will feature the full range of industrial automation, transmission and fluid power solutions.
(continue reading...)
Comments Off on Industry 4.0 is changing Industries, Markets ... and Trade Fairs
Polish Corporation of Hydraulics and Pneumatics Drives and Controls: New board
by CETOP on Mar.23, 2017
On 16 March 2017, the Polish Corporation of Hydraulics and Pneumatics Drives and Controls elected a new board. Krzysztof Kedzia became Vice President of the Cooperation and will be the main contact person for CETOP. Krzysztof Kedzia succeeds Dr. Henryk Chrostowski who unfortunately passed away in January 2017. (continue reading...)
Comments Off on Polish Corporation of Hydraulics and Pneumatics Drives and Controls: New board
CETOP as co-exhibitor at IFPE 2017
by CETOP on Feb.22, 2017
Las Vegas (USA), March 7-11, 2017
CETOP will attend IFPE, the most important international exhibition of fluid power and motion control for the US market as co-exhibitor of ASSOFLUID. ASSOFLUID, the Italian Association of Manufacturing and Trading Companies in Fluid Power Equipment and Components, is a member association of CETOP. The ASSOFLUID Pavilion can be found in South Hall Booth S-80049. (continue reading...)
Comments Off on CETOP as co-exhibitor at IFPE 2017
Positive production development in 2017
by CETOP on Jan.26, 2017
Leading trade fair MDA presents predictive
maintenance as a core element
of Industrie 4.0
Power Transmission Engineering and Fluid Power associations expect positive production development in 2017
Frankfurt, January 26, 2017: With a joint sales volume of almost 23 billion euros and nearly 130,000 staff, German power transmission engineering and fluid power form the largest industries in the German mechanical and plant engineering sector.
Both supplier industries attract customers from around the globe with their high-quality products, innovative solutions and services. This is also reflected in the industries’ top position in the world trade share at over 20 percent. (continue reading...)
Comments Off on Positive production development in 2017