FHPA Finland: New Chairman of the board
by CETOP on Apr.02, 2020
There has been a change in the board of the Finnish Hydraulics and Pneumatics Association FHPA. In January 2020, Tapio Lehti, Parker Hannifin, was elected Chairman of the Board of the Finnish Hydraulics & Pneumatics Association. He followed Kalle Tuohimaa, Bosch Rexroth, who actively represented FHPA in CETOP for a long time. (continue reading...)
Comments Off on FHPA Finland: New Chairman of the board
Hanover Fair 2020 cancelled
by CETOP on Mar.26, 2020
The Hannover Messe will be cancelled in 2020 due to the Covid 19 pandemic. The cancellation is regrettable, but it is the only right decision, emphasises VDMA General Manager Thilo Brodtmann. (continue reading...)
Comments Off on Hanover Fair 2020 cancelled
HPKON WILL HOST THE HYDRAULICS AND PNEUMATICS INDUSTRY IN IZMIR, 18-21 NOVEMBER 2020
by CETOP on Mar.16, 2020
During the HPKON congress and exhibition, the Turkish Fluid Power Association AKDER, being member in CETOP, has an education programme in Hydraulics and Pneumatics. (continue reading...)
Comments Off on HPKON WILL HOST THE HYDRAULICS AND PNEUMATICS INDUSTRY IN IZMIR, 18-21 NOVEMBER 2020
HANNOVER MESSE 2020 is postponed
by CETOP on Mar.06, 2020
HANNOVER MESSE 2020 will be postponed to the week of 13 to 17 July 2020. Deutsche Messe AG is thus responding to global developments relating to Covid-19 (coronavirus).
Deutsche Messe made the decision to postpone HANNOVER MESSE 2020 to July 2020 in close cooperation with the Hannover Region Health Authority, the HANNOVER MESSE Exhibitors' Council and the partner associations VDMA (German Engineering Federation) and ZVEI (German Electrical and Electronic Manufacturers' Association). (continue reading...)
Comments Off on HANNOVER MESSE 2020 is postponed
THE ECONOMIC SITUATION IN ITALY
by CETOP on Mar.03, 2020
The Italian CETOP member ASSOFLUID reports on the economic situation in Italy.
In the fourth quarter of 2019 the seasonally and calendar adjusted, chained volume measure of Gross Domestic Product (GDP) decreased by 0.3% with respect to the previous quarter and remained unchanged with respect to the same quarter of previous year. The carry-over annual GDP rate of change for 2020 is equal to -0.2%. (continue reading...)
Comments Off on THE ECONOMIC SITUATION IN ITALY
Certification of “PROJEKTHYDRAULIK SVERIGE AB”, Sweden, as CETOP Education Centre
by CETOP on Feb.25, 2020
On application of the Swedish Fluid Power Association SFMA, the edcuation centre ProjektHydraulik Sverige AB, Sweden, is re-certified for Industrial and Mobile Hydraulics Level 3.
A description of the levels is available in the chapter Education / Level of Competence.
Comments Off on Certification of “PROJEKTHYDRAULIK SVERIGE AB”, Sweden, as CETOP Education Centre
German mechanical engineering in 2019
by CETOP on Feb.19, 2020
The German CETOP member association VDMA gives a review about German mechanical engineering in 2019: The end of the year was no exception, there was no surprise. In December 2019, orders fell short of the previous year's level by 7 percent in real terms. Domestic orders in the final month were down 5 percent, with 7 percent fewer orders coming from abroad. (continue reading...)
Comments Off on German mechanical engineering in 2019
ASSOFLUID and ASSIOT merge into FEDERTEC
by CETOP on Feb.13, 2020
The Italian CETOP member association ASSOFLUID joins in FEDERTEC, the Italian Federation of Mechatronic Technologies and Components for Fluid Power, Power Transmission, Smart Automation and Control of Industrial Products and Processes. (continue reading...)
Comments Off on ASSOFLUID and ASSIOT merge into FEDERTEC
12th IFK 2020 - Fluid Power - Future Technology
by CETOP on Feb.06, 2020
The 12th International Fluid Technology Colloquium (12th IFK) will take place from 9 to 11 March 2020 in the International Congress Center in Dresden. Trendsetting trends and developments in the field of fluid mechatronic systems will be presented and intensively discussed at one of the most important industry meetings for fluid technology. (continue reading...)
Comments Off on 12th IFK 2020 - Fluid Power - Future Technology
Certification of “BETTINO PADOVANO”, Italy, as CETOP Education Centre
by CETOP on Feb.03, 2020
On application of the Italian Fluid Power Association ASSOFLUID, the edcuation centre BETTINO PADOVANO, Senigallia, Italy, is certified for Pneumatics, level 2.
A description of the levels is available in the chapter Education / Level of Competence.
Comments Off on Certification of “BETTINO PADOVANO”, Italy, as CETOP Education Centre
Re-certification of the National Fluid Power Centre (NFPC), UK, as CETOP Education Centre
by CETOP on Jan.17, 2020
On application of the British Fluid Power Association BFPA, the edcuation centre “National Fluid Power Centre (NFPC)”, is certified CETOP Education Centre, Mobile and Industrial Hydraulics and Pneumatics Levels 1,2 & 3.
A description of the levels is available in the chapter Education / Level of Competence.
Comments Off on Re-certification of the National Fluid Power Centre (NFPC), UK, as CETOP Education Centre
Call for Papers: Forum Industrie 4.0 at Hannover Messe 2020
by CETOP on Dec.18, 2019
Deutsche Messe AG, together with its partners Plattform Industrie 4.0, VDMA and ZVEI, will be organizing the Forum Industrie 4.0 for the 10th time in a row at the upcoming HANNOVER MESSE to discuss the opportunities for digitalization of value chains and products as well as their user benefits. (continue reading...)
Comments Off on Call for Papers: Forum Industrie 4.0 at Hannover Messe 2020
Call for Papers: 11th Colloquium Mobile Hydraulics
by CETOP on Dec.10, 2019
The 11th Colloquium Mobile Hydraulics will take place from 10 to 11 September 2020 in Karlsruhe. The registration deadline for the Call for Papers is 26 January 2020. (continue reading...)
Comments Off on Call for Papers: 11th Colloquium Mobile Hydraulics
1st HYDRAULIX trade congress with successful kick-off event in Sindelfingen
by CETOP on Dec.05, 2019
The hydraulic industry experienced the event highlight of the year on 28 and 29 October 2019. On the day of the congress, the organisers - Vereinigte Fachverlage GmbH and the VDMA Fluid Power Association - were able to announce "Full House" with 170 congress participants. (continue reading...)
Comments Off on 1st HYDRAULIX trade congress with successful kick-off event in Sindelfingen
SUMMIT ON “STANDARDS” IN ISTANBUL
by CETOP on Nov.25, 2019
On the occassion of the World Standards Day, the CETOP member association, AKDER, held a summit meeting on "Standards" in Istanbul on 14.10.2019
Comments Off on SUMMIT ON “STANDARDS” IN ISTANBUL
CETOP President’s Council meets InduMotion in Brussels
by CETOP on Nov.18, 2019
InduMotion which is the CETOP member association in Belgium, invited the CETOP President's Council to a meeting on 22/23 October 2019 in Brussels. Thanks to an excellent organisation, the meeting has been a very successful one. (continue reading...)
Comments Off on CETOP President’s Council meets InduMotion in Brussels
Dutch Fluid Power Transmission Conference (DFPTC)
by CETOP on Nov.11, 2019
On Thursday 10 October 2019, the Dutch Fluid Power Transmission Conference (DFPTC), co-organized by the CETOP member association FEDA, took place for the 9th time at the DeFabrique in Utrecht. (continue reading...)
Comments Off on Dutch Fluid Power Transmission Conference (DFPTC)
ARTEMA Global Indicator for Septembre 2019 : Uncertainty and lack of visibility
by CETOP on Nov.04, 2019
The French CETOP member ARTEMA reports on the market outlook based on an inquiry among their member companies. (continue reading...)
Comments Off on ARTEMA Global Indicator for Septembre 2019 : Uncertainty and lack of visibility
3rd International Expert Forum for Bearings
by CETOP on Oct.29, 2019
Register now! 3rd International Expert Forum for Bearings -Rolling and Plain Bearings!
31 March -1 April 2020 in Hannover
Unique, enriching, networking. Be part of it! (continue reading...)
Comments Off on 3rd International Expert Forum for Bearings
Jean-Claude Reverdell becomes Artema's new president
by CETOP on Oct.23, 2019
On September 26, 2019, Jean-Claude Reverdell - CEO of Sew Usocome was elected President of Artema for 3 years.
Pascal Gutton - Camozzi France was elected President of the Pneumatic Transmissions and Automation Group. He succeeds Pierre Yves Binetruty - Aventics who becomes vice-president. (continue reading...)
Comments Off on Jean-Claude Reverdell becomes Artema's new president
Certification of “OPERE SOCIALI DON BOSCO”, Italy, as CETOP Education Centre
by CETOP on Oct.01, 2019
On application of the Italian Fluid Power Association ASSOFLUID, the edcuation centre “OPERE SOCIALI DON BOSCO”, SESTO SAN GIOVANNI (MI), Italy, is awarded CETOP Education Centre, Pneumatics, level 2.
A description of the levels is available in the chapter Education / Level of Competence.
Comments Off on Certification of “OPERE SOCIALI DON BOSCO”, Italy, as CETOP Education Centre
BFPA celebrates its 60th anniversary in 2019
by CETOP on Sep.20, 2019
In the sixty years since its formation, the BFPA has grown from a small group of mutually supportive companies to a major trade association undertaking business on an international scale. (continue reading...)
Comments Off on BFPA celebrates its 60th anniversary in 2019
International Bearing Conference
by CETOP on Sep.16, 2019
BEARING WORLD 2020 - Call for Papers:
Submit your abstract and reach international experts
Industrial Research and Science in Dialogue with Practical Application (continue reading...)
Comments Off on International Bearing Conference
International Fluid Power Conference 2019, 19.-20. September 2019, Maribor, Slovenia
by CETOP on Sep.11, 2019
The Slovenian fluid power association FTS will be happy to welcome you on the International Fluid Power Conference 2019, 19.-20. September 2019, Maribor, Slovenia. (continue reading...)
Comments Off on International Fluid Power Conference 2019, 19.-20. September 2019, Maribor, Slovenia
Certification of ASSOCIAZIONE CNOS-FAP REGIONE LOMBARDIA, Italy, as CETOP Education Centre
by CETOP on Sep.09, 2019
On application of the Italian Fluid Power Association ASSOFLUID the edcuation centre ASSOCIAZIONE CNOS-FAP REGIONE LOMBARDIA, Italy, is awarded CETOP Education Centre for Pneumatics, level 3.
A description of the levels is available in the chapter Education / Level of Competence.
Comments Off on Certification of ASSOCIAZIONE CNOS-FAP REGIONE LOMBARDIA, Italy, as CETOP Education Centre
Certification of BOSCH REXROTH B.V. BOXTEL, The Netherlands, as CETOP Education Centre
by CETOP on Sep.09, 2019
On application of the Dutch Fluid Power Association FEDA the edcuation centre BOSCH REXROTH B.V., Boxtel, The Netherlands, is awarded CETOP Education Centre for Hydraulics, level 3.
A description of the levels is available in the chapter Education / Level of Competence.
Comments Off on Certification of BOSCH REXROTH B.V. BOXTEL, The Netherlands, as CETOP Education Centre
DFPTC - The Dutch Fluid Power Transmission Conference
by CETOP on Aug.05, 2019
Theme 2019: Intelligent Hydraulic Power Transmission: The influence of electronic intelligence on hydraulic and mechanical drive engineering
For a number of years now, the FEDA branch organization and the Dutch Association for Hydraulics (VPH) have jointly organized the Dutch Fluid Power Transmission Conference - DFPTC for short. On Thursday 10 October 2019, the 9th edition of this interesting and inspiring event will take place. This year theory and practice will be combined in a duo presentation. The different perspectives are given substance by having two or more parties presenting. In addition to a theoretical part, the presentation also includes attention for practice. Think of live demos or hands-on activities with the audience. (continue reading...)
Comments Off on DFPTC - The Dutch Fluid Power Transmission Conference
New CETOP President's Council elected on the occasion of the CETOP General Assembly 2019, Ceský Krumlov, Czech Republic
by CETOP on Jun.20, 2019
On 13 and 14 June 2019, this year’s CETOP General Assembly took place in Český Krumlov, Czech Republic, hosted by the Czech CETOP member CAHP.
Participants of the CETOP General Assembly voted unanimously for a new CETOP President’s Council. The new period of office will last from June 2019 to May 2022. (continue reading...)
Comments Off on New CETOP President's Council elected on the occasion of the CETOP General Assembly 2019, Ceský Krumlov, Czech Republic
AKDER TURKISH FLUID POWER ASSOCIATION IS 25 YEARS OLD
by CETOP on May.23, 2019
Fluid Power in Turkey became a dedicated sector in early 1960s. While this sector achieved gradual growth in size and familiarity during the past 20-25 years, it was only in 1990s when the establishmnet of an association started to be discussed. Subsequently, AKDER Fluid Power Association was founded on 3 February 1994.
AKDER has achieved steady growth, as it enabled its members to get together and discuss mutual challenges. As one of AKDER's founders said: "Before AKDER was founded, we would shy away from dropping by the offices of our collleagues in the sector. We did not really gather to talk about work. This was especially true because of the perceived competition among each other. But now, we meet under the name of AKDER, share statistics and are at ease, knowing we are on the same boat together." (continue reading...)
Comments Off on AKDER TURKISH FLUID POWER ASSOCIATION IS 25 YEARS OLD
VDMA calls for participation in European elections
by CETOP on May.02, 2019
Just in time for the start of the European election campaign, the VDMA is launching its initiative "Go Vote - Engineering industry votes for Europe". With this initiative, the Association calls on its members and their staff to take part in the European elections on 26 May 2019. (continue reading...)
Comments Off on VDMA calls for participation in European elections
Call for papers: 12th International Fluid Power Conference, March 9 - 11, 2020 in Dresden
by CETOP on Apr.16, 2019
The 12th International Fluid Power Conference (IFK) will be held in Dresden on March 9-11, 2020. The IFK is one of the world's most significant scientific conferences on fluid power control technology and systems. It offers a common platform for the presentation and discussion of trends and innovations to manufacturers, users and scientists. The theme of the 12th IFK will be "Fluid Power - Future Technology!"
The abstract submission is opened until 10th of June 2019. (continue reading...)
Comments Off on Call for papers: 12th International Fluid Power Conference, March 9 - 11, 2020 in Dresden
50th Anniversary of EUROTRANS – 50 years of global networking
by CETOP on Apr.10, 2019
EUROTRANS – the European Committee of Associations of Manufacturers of Gears and Transmission Parts – celebrated its 50th Anniversary on the occasion of the 5th International Drive Technology Meeting in Hanover, Germany, on Saturday, 30th March 2019. (continue reading...)
Comments Off on 50th Anniversary of EUROTRANS – 50 years of global networking
The NEW CETOP Directory 2019 – Updated on the occasion of the IAMD Hanover
by CETOP on Apr.01, 2019
With its CETOP Directory, a buyers' guide, CETOP presents the member companies of the CETOP member associations to a broad audience both in Europe and abroad. The Directory contains information on the products of over 1,000 companies, both manufacturers and suppliers, in the European fluid-power industry. (continue reading...)
Comments Off on The NEW CETOP Directory 2019 – Updated on the occasion of the IAMD Hanover
Certification of Fagskolen i Hordaland, Norway, as CETOP Education Centre
by CETOP on Mar.20, 2019
Certification of Fagskolen i Hordaland, Norway, as CETOP Education Centre
On application of the Norwegian Fluid Power Association HPF NORWAY, the edcuation centre Fagskolen i Hordaland, Norway, is awarded CETOP Education Centre for Hydraulics, level 1 and 2.
A description of the levels is available in the chapter Education / Level of Competence.
Comments Off on Certification of Fagskolen i Hordaland, Norway, as CETOP Education Centre
Forum "Motion & Drives"
by CETOP on Mar.15, 2019
At the forthcoming Hanover fair (1-5 April 2019) the VDMA Fluid Power Association organises the well-known "Motion & Drives" forum. In this established forum, concepts, innovative solutions and application examples will be presented in Hall 23/B20 as part of the hannover Messe. (continue reading...)
Comments Off on Forum "Motion & Drives"
World Interoperability Conference - Networking with OPC UA Standardization groups, 1. April 2019 i Hanover
by CETOP on Mar.08, 2019
VDMA being co-organiser of the event provided some information.
The world language of the machines is under development and with the help of OPC UA it will be implemented! Would you like to get to know the industries and members of the standardization groups personally? (continue reading...)
Comments Off on World Interoperability Conference - Networking with OPC UA Standardization groups, 1. April 2019 i Hanover
Power Transmission and Fluid Power - Intelligent, Networked and Communicative into the Future
by CETOP on Mar.05, 2019
The power transmission and fluid power industries are expecting growth of around 3 percent in 2019. The industry focusing on industry 4.0 solutions at the Hannover Messe. The World trade share on the rise.
Comments Off on Power Transmission and Fluid Power - Intelligent, Networked and Communicative into the Future
SFMA: New Swedish Fluid Motion Association
by CETOP on Feb.20, 2019
SFMA – the Swedish Fluid Motion Association is the new association that was established in 2019 through the merging of HPF (Swedish Association for Hydraulics and Pneumatics) – established 1962, and IFS (Fluid System Engineering Association) – established 1972, and currently comprises some 60 members. With joint forces the aim of the new association is to become stronger in promoting the industry and quality, safety and reliability when using hydraulics and pneumatics. SFMA actively supports standardisation in Sweden and works for increased information and education of users and suppliers in this field. SFMA is also the certifying body for hydraulics engineers in Sweden – a quality and professional benchmark for the automation industry.
Comments Off on SFMA: New Swedish Fluid Motion Association
Turkish Industry will progress to the Giants’ League with “WIN EURASIA” 2019
by CETOP on Feb.12, 2019
Gathering the world's 6 largest trade fairs under a single roof with the concept of Industry 4.0, once again WIN EURAS?A is getting ready to bring together all the world giants in Istanbul between March 14 - 17, 2019 under the slogan "Become a Part of the Future". The Turkish fluid power association AKDER is one of the official supporters of this event.
Comments Off on Turkish Industry will progress to the Giants’ League with “WIN EURASIA” 2019
AKDER MEMBERS MEET BY THE BOSPHORUS
by CETOP on Jan.15, 2019
Members of AKDER TURKISH FLUID POWER ASSOCIATION dined together on the Bosphorus strand. The dinner by the Bosphorus was attended by over 50 members.
Mr Semih KUMBASAR, President of AKDER, shared updates on the association’s recent activities; notably on training programmes, the General Assembly of CETOP in Copenhagen, latest statistics and macroeconomic developments in Turkey.
Comments Off on AKDER MEMBERS MEET BY THE BOSPHORUS
Indumation.be 2019, fair for Factory, Process and Automation, 6.-8. February 2019, Kortrijk Xpo
by CETOP on Jan.15, 2019
The Belgian fluid power association InduMotion will be happy to welcome you on Indumation.be 2019. From February 6 till 8, InduMotion, Expo Advice and Agoria, are hosting the 5th edition of INDUMATION.be, a Belgian fair for Factory, Process and Automation. The theme will be 'Smart and integrated solutions for Industry'. Indumation.be 2019 is growing to a next level. The existing visitor routes and the range of components, devices, technology and solutions for industrial automation, innovation and optimization for all branches of the Industry (discrete & process) and infrastructures remain most important.
Comments Off on Indumation.be 2019, fair for Factory, Process and Automation, 6.-8. February 2019, Kortrijk Xpo
Re-Certification of I.I.S. “G. VALLAURI”, Italy, as CETOP Education Centre
by CETOP on Jan.11, 2019
On application of the Italian Fluid Power Association ASSOFLUID, the edcuation centre I.I.S. "G. VALLAURI", Fossano (CN), Italy, is awarded CETOP Education Centre. I.I.S. "G. VALLAURI" has recently been re-certified for Hydraulics, level 1 and Pneumatics, level 3. A description of the levels is available in the chapter Education / Level of Competence.
Comments Off on Re-Certification of I.I.S. “G. VALLAURI”, Italy, as CETOP Education Centre
German mechanical engineering industry remains robust in a difficult environment
by CETOP on Dec.19, 2018
Mechanical engineering companies in Germany successfully defied the trade policy storms in 2018 and even increased their workforces despite many uncertainties. "Our forecast for a production growth of 5 percent to a record 228 billion euros in 2018 is ambitious but feasible," said VDMA President Carl Martin Welcker at the association's annual press conference. (continue reading...)
Comments Off on German mechanical engineering industry remains robust in a difficult environment
FEDA MEMBER EVENT AND GENERAL MEETING
by CETOP on Dec.14, 2018
The Netherlands CETOP member association FEDA held their member event and general meeting on Thursday, 13 December 2018.
Comments Off on FEDA MEMBER EVENT AND GENERAL MEETING
AKDER AWARDED BY TURKISH STANDARDS INSTITUTION (TSE)
by CETOP on Dec.12, 2018
The Turkish CETOP member association AKDER received national award.
AKDER has been collaborating with the Turkish Standards Institution (TSE) on Fluid Power Standards (ISO TC 131) since 2004. More recently, AKDER has been actively participating to the country level discussion at the Mirror Committee. (continue reading...)
Comments Off on AKDER AWARDED BY TURKISH STANDARDS INSTITUTION (TSE)
BSI secures membership of CEN and CENELEC
by CETOP on Dec.04, 2018
BFPA, the British Fluid Power Association, cooperates closely with BSI when it comes to standards for fluid power. BSI, the British Standards Institution, is the national standards body of the UK.
On 23 November, the General Assemblies of the European Standards Organizations CEN and CENELEC approved a plan that secures BSI's full membership post-Brexit. BSI welcomes the outcome as a pragmatic solution that provides stability for the European standards system while meeting the needs of the stakeholders.
(continue reading...)
Comments Off on BSI secures membership of CEN and CENELEC
National Oilwell Varco launches new CETOP Level 1 course in hydraulics
by CETOP on Nov.26, 2018
On application of the BFPA British Fluid Power Association, NOV National Oilwell Varco Training Centre was awarded CETOP approved Education centre. Following their recent accreditation to deliver CETOP Level 1 courses, BFPA Training member National Oilwell Varco Training Centre, based in Scotland are pleased to announce they have held their first CETOP Level 1 course. (continue reading...)
Comments Off on National Oilwell Varco launches new CETOP Level 1 course in hydraulics
Certification of IPSIA “A. Pacinotti”, Italy, as CETOP Education Centre
by CETOP on Nov.16, 2018
On application of the Italian Fluid Power Association ASSOFLUID, the edcuation centre IPSIA "A. Pacinotti", Pontedera (PI), Italy, is awarded CETOP Education Centre. IPSIA "A. Pacinotti", has recently been certified for Pneumatics, level 2.
A description of the levels is available in the chapter Education / Level of Competence.
Comments Off on Certification of IPSIA “A. Pacinotti”, Italy, as CETOP Education Centre
InduMotion, Belgium: New board
by CETOP on Nov.06, 2018
The Belgium association InduMotion, being member in CETOP for many years, has about 80 members and thus, covers the majority of the Belgian industrial automation market. The members are active in Hydraulics, Pneumatics, Electromechanical, Transmissions and Electronic in power as well as in motion.
Comments Off on InduMotion, Belgium: New board
International Conference "Hydraulic and Pneumatic Drives and Controls 2018"
by CETOP on Oct.05, 2018
The International Scientific-Technical Conference: Hydraulic and Pneumatic Drives and Controls 2018, Condition, Need, Expectations and Possibilities. Work, Mining, Construction and Technology Machines takes place at Kliczków Castle, Poland, 7-9 November 2018. Co-organizer of this event is the polish fluid power association Corporation Poland. This onference is the largest and most important national forum for the exchange of concepts, experiences and opportunities in the field of fluid technology. It has an international character and has been covered, among others the patronage of the European Committee for Hydraulics and Pneumatics (CETOP).
(continue reading...)
Comments Off on International Conference "Hydraulic and Pneumatic Drives and Controls 2018"